RICHARD MILLE RM 19-02 Tourbillon "Fleur" / RM 19-02 watch AT http://www.luxury4ubest.com

Richard Mille replica watches for sale

RICHARD MILLE RM 19-02 Tourbillon "Fleur" / RM 19-02 watch

Ref. No: RM 19-02 Tourbillon Fleur

Case:
Titanium

Diameter: 45.40mm x 38.30mm

Strap:
Alligator

Movement: Manual Winding

Size: unsex

Richard Mille wholesale watches
At
SIHH in Geneva, Richard Mille introduced its new luxury ladies’ watch, the RM
19-02 Tourbillon Fleur. The watch combines a flying tourbillon mechanism with a
distinctive automaton feature - all in a characteristically Richard Mille
case.

time4usale.com
The
Tourbillon Fleur has a manually wound manufacture caliber, simply known as
RM19-02. Its functions are hours and minutes; it has a 36-hour power reserve.
The time can be read on the small dial in the top right corner. Beneath it, at 7
o’clock, lies an unusual flying tourbillon. The cage is 11.1 mm wide, with a
balance wheel diameter of 10 mm. But the entirety of it sits between the five
petals of a magnolia blossom. These hand-crafted petals, made of gold, will open
every five minutes. When they do, the tourbillon rises 1 mm higher, pushing out
to become more visible. It is meant to resemble the motion of a flower’s stamen;
to that end, the center of the tourbillon is set with precious stones to look
more like a bud. The petals’ movements and the rise of the tourbillon are
powered by a second mainspring barrel and a separate gear train. The wearer can
open or close the magnolia manually, adjusting its cycle, via a pusher at 9
o’clock.

fashionsalewatch.com

RM19-02 has a frequency of 21,600 vph. It runs in 51 jewels. The
movement has a Glucydur balance, Kif shock absorption, and a Nivarox balance
spring. There are 4 screws around the balance wheel for fine adjustment. For
more effective winding, the mainspring uses a barrel pawl with progressive
recoil. Richard Mille says that this device makes winding roughly 20 percent
more efficient. The crown has a torque limiting system, guarding the watch
against overwinding. The case is made of grade 5 titanium, as are the baseplate
and bridges. It is a three-part, tonneau-shaped case. Construction of the case
requires 47 stamping operations; in total, there are 250 discrete milling
operations. The finishing processes require a full day of work for each watch